Protective Paint

Tri Polarcon Pvt Ltd is a leading Pune based waterproofing service provider, We are also Manufacturer and Supplier of Waterproofing materials. We are offering Waterproofing Services to our clients. We are an outstanding organization, engaged in offering a comprehensive range of Floor Waterproofing Service. Offered service is well-known for its dependability and timely execution. Our professionals work with the clients in a coordinated manner to understand their specific needs and offer them exact solutions.

A qualified industrial waterproofing contractor can show viral lead for your avocation. an impressive industrial waterproofing system has potential to salvage your finances by preventing blow to your business area.

Triguard PUAR/PUAL

Triguard PU Topcoat High Gloss is a two component, polyurethane topcoat (direct to metal) with a high gloss finish. This Topcoat contains anti corrosion chemicals offering excellent corrosion protection. Application enables fast operation – reducing costs, excellent air-dry und force dry capabilities. All Toners are chromate and lead free and provides excellent UV protection. Advantages:- Excellent corrosion resistance

  • Excellent water and blister resistance
  • High gloss
  • xcellent adhesion (especially to metal substrates, such as steel, galvanized steel or untreated aluminum)
  • Excellent exterior durability
  • Ambient self-crosslinking offers excellent chemical and solvent resistance

Application

  • Industrial Maintenance Finishes for steel and concrete
  • Commercial Architectural Finishes for metal
  • Institutional Coatings for concrete and masonry
  • DIY Metal Coatings
  • General Industrial Finishes for metal
  • Transportation Coatings (e.g., railcar, shipping containers)

Triguard HB 300

TRIGUARD HB 300 is a two component, solvent free epoxy coating specially formulated for potable water storage tanks. It is formulated for maintaining hygiene of highest standard, corrosion resistance, chemical resistance and ease of cleanability.
PRODUCT ADVANTAGES

  • NTC approved for food grade test
  • 100% Non Volatiles.
  • Prevents contact of potable water and concrete and hence contamination.
  • Seamless and hygienic finish.
  • Easy cleaning and low maintenance.
  • Easy to apply.
  • Excellent bonding for long term durability.
  • Good Chemical resistance.
  • Can be applied on concrete and steel surfaces.

TYPICAL USES, ADVANTAGES
TRIGUARD HB 300 is a high performance coating specially designed to provide clean, corrosion resistant, bacteria resistant surface that could be used for highest contamination prevention requirement of potable water tanks.

TRIGUARD ENAMEL PAINT

Description
The steel surface coated should be dry, sound and undamaged. It shall be free of surface contaminants such as grease, oil, dust, salts and rust. Soluble salts must be removed by washing with fresh water. Dry brushing should be done to remove dirt and dust. If oil or grease is present, clean using mild detergent or solvent and rinse thoroughly. It there is evidence of rusting, the affected areas should be thoroughly sand down with sandpaper or mechanical tools to ensure complete removal. Application primer coat to prior.

  • MIXING RATIO:-
    Stir all products thoroughly each time before use. Shake the can well during 2 minute after hearing the ball rattles. Spray at a distance for 25/30 minutes applying thin, quick and criss-cross layers leaving a few minutes between layers to dry. In order achieve a uniform finish and avoid any dripping, it is advisable to apply two thin layers instead of a thick one. At the end of the application, turn the can over and spray until only gas comes out. Adjust Spray viscosity by using recommended thinner (Application viscosity = 20-25 seconds). After application Spray gun must be clean properly to avoid any damage.
    STORAGE PRECAUTIONS:
    It is combustible. The container should be kept in sealed, dry, cool, well ventilated place under normal condition and stored in accordance with national regulation
    This product contains flammable solvents, keep away from heat, sparks and open flame.
    HEALTH & ENVIRONMENTAL DATA:
    1. Avoid prolong contact with skin and Eye breathing of vapor, or spray mist.
    2. Proper Ventilation in Application Area
    3. Use Mask, Safety Shoes, Goggles, and Hand Gloves.
    4. During application of paint, contact of liquid paint with eyes, skin, inhalation of paint mist and paint vapor should be strongly avoided.
    5. For spray application systems; applicator should wear protective clothing, Hand gloves, Mask Safety Shoes, Goggles, also skin and respiratory protection are always recommended.
    6. Keep away from reach of children.

TRIGUARD EPZP

Description
Triguard EPZP
(Zinc-Phosphate epoxy resin primer to protect steel reinforcement within repair
mortars)

to further corrosive elements such as chlorides attacking the steel. Compatible with all mortars and fluid micro-concretes.

Advantages
• Excellent protective barrier to the steel from further corrosive attack
• Single component product – easy to use with no restrictive pot-life
• Time saving – touch dry after 15 – 45
minutes
• Economical – single component ensures almost no waste

Uses
Triguard EPZP is the recommended anti-corrosion primer for exposed steel reinforcement for use with repair mortars. The product provides a barrier recoatable and overlay times will be reduced. The minimum application temperature for
Triguard EPZP is 5°C.